PDA

View Full Version : Wrap Help



Brett
01-26-2010, 09:38 AM
I have a question for all of the rod building gurus on here: if I am going for clear wraps on a blonde bamboo blank, what is the best thread to use (brand, type, color, etc.)? Thanks a lot in advance for your help!


Brett

adam
01-26-2010, 12:04 PM
I am not a guru. I am a hobbiest tinkerer that gathers the guru together. White gossamer Pearsals with Flex Coat light. I have not done clear wraps but that is what I would try first. Also, use cotton gloves to keep off skin oils, snags from fingertips being rough, that sort of thing. The wraps should go clear with the application of Flex Coat. A lot of traditionalist makers will not use Flex Coat, they use varnish. I am traditionalist where I see fit, I base my practice in tradition (bamboo) but I am not beyond good practices using modern methods.

greendrake
01-26-2010, 04:59 PM
Adam gave you good advice.The only thing I would add is don't pack the wraps extremely tight and definately do not burnish the thread.
Varnish will sometimes let the shimmers or some call it frosting or ghosting.

For absolutely water clear wraps use flex coat lite or Threadmaster wrap finish.
http://i305.photobucket.com/albums/nn211/bamboorods/IMG_9918.jpg
http://i305.photobucket.com/albums/nn211/bamboorods/IMG_9917.jpg
http://i305.photobucket.com/albums/nn211/bamboorods/IMG_9915.jpg

Need any additional info just ask.
Will

adam
01-26-2010, 06:05 PM
Big show off.

*grinning*

Brett
01-26-2010, 06:27 PM
Great info guys, thanks a lot. Do you think that high build in a very thin layer would do the same as light?

stevekiley
01-26-2010, 07:23 PM
all good tips,the fexcoat needs to be diluted,i use 1 part resine 1 part hardener,mix together for 2 min.the 1 part denatured alchol,mix the same,as for thread i have had goo results with YLI natural,not as many shimmer as you get with white.when the flex coat has bin on for about 10 or 15 min.squigy of the excess let cure and finish as you do normally.hope this helps ,steve

Brett
01-26-2010, 08:11 PM
Thanks a lot guys. I'll post some pictures when I finish the rods

Brett
02-13-2010, 09:47 PM
Ok here are some B&Ws of the 6' 2wt. I'll post better shots when I take them off of the camera. The rod is a one piece, blonde in color with white wraps and green tipping with a seafoam green agate stripping guide.

http://i922.photobucket.com/albums/ad68/hawaiianfiresauce/423.jpg
http://i922.photobucket.com/albums/ad68/hawaiianfiresauce/422.jpg
http://i922.photobucket.com/albums/ad68/hawaiianfiresauce/419.jpg
http://i922.photobucket.com/albums/ad68/hawaiianfiresauce/416.jpg
http://i922.photobucket.com/albums/ad68/hawaiianfiresauce/415.jpg
http://i922.photobucket.com/albums/ad68/hawaiianfiresauce/427.jpg

adam
02-13-2010, 11:29 PM
Very cool.

Kailua is where I did my intermediate hang gliding practice. Just where the highway comes down to the flats, there is a sailboat shop. I would land just behind the sailboat shop in a old cattle field, taking off at the top of that foothill.

Sometimes I would come down to Kailua after taking off at Makapuu, that was later after I learned how to fly the big waves.

Over in the bay is bonefish.

Hawaii no ka oi.

Did you make the rod or build up the blank?

Brett
02-14-2010, 12:45 AM
Very cool Adam. I'm pretty sure I know exactly the field you landed in. If I'm not mistaken, my father and I have released small populations of upland gamebirds in that field over the years in order to train our dogs.

Unfortunately, I do not have the time or funds to build blanks myself (as I am a full time college student and a Div. I athlete). Making blanks is something I'd like to get into as soon as I have the time and money. This rod was a gift to a friend, and I picked the blank up from an ebay vendor for cheap. I'm actually very satisfied by the way that it performs, for being so cheap.

I'm also finishing up a 0wt cane rod on a blank built by a rod maker by the name of Tony Spezio. I'll be sure to post more pics of both rods soon.

greendrake
02-14-2010, 07:00 AM
Tony is a great guy.He's a member of the rodmakers list on the net and I traded many off list emails with him when I first started making rods. He is very helpful and willing to share info.Very talented rodmaker as well.He even built his own airplane :shock:

Will

adam
02-14-2010, 11:30 AM
I'm also finishing up a 0wt cane rod on a blank built by a rod maker by the name of Tony Spezio. I'll be sure to post more pics of both rods soon.

I don't know much about Tony's work although I do know he is a nice guy, like Will says, we have traded some e-mails.

0-weight?

That's some pretty thin bamboo.

I would like to see more images of your work. It's cool you make rods from bamboo blanks. I do that too, hell, all makers do so you are one of us.

That field has a tree that owns me. I landed squarely on top of it. Right there in front of G~d and everyone, in the top of that tree in my hang glider. Not a single scratch to me or my wing. Psychological damage, yes but not one single scratch. One of my wilder friends use to pick Psylocibin Cubensis in that field and then go surfing or flying.

This was in the 80's.

Brett
02-14-2010, 07:02 PM
From what I hear, Tony is a great guy, although I've never spoken to him. I picked the blank up in a trade with a guy from another forum. He goes by Zenkoanhead, I'm sure a few of you might recognize the name.

I am definitely going to post more pics as soon as I have time to take more.